Steps for beginner crews
- Make a table with two columns, time and light.
- Ask for a reading every 10 seconds for one minute.
- Circle the rows where light is 0 lx.
Check your work
Your table has at least six rows, and you circled the zeros.
Talk it over
Where could a satellite go that would make its light sensor read zero?
Steps for intermediate crews
- Record time, light (lx) and temperature (°C) every 5 seconds for one minute.
- Find how long the light stays on and how long it stays off.
- Plot light against time on paper or in a spreadsheet.
Check your work
You measured the on and off durations and drew the pattern.
Talk it over
The simulated cycle is 30 s. A real low-orbit pass around Earth takes about 90 minutes. What changes?
Steps for professional crews
- Sample once per second for 40 s and record
sequence, light and temperature. - Derive the light rule from the sequence numbers and confirm it against
Sample::syntheticin the station source. In this demo the sequence is the time in seconds, like the station'ssimulatecommand; the installed classroom station counts requests instead. - Describe how you would replace the synthetic eclipse with one computed from an orbit model.
Check your work
You stated the rule (lit when sequence mod 30 is below 20) and verified it against the data.
Talk it over
What inputs would an eclipse model need, and where would you get them for a real satellite?
Something unclear or wrong? Suggest a change on GitHub.